No connection to iDRAC or USC with LCC after update
HiVery new to servers so please bear with me. Just bought 2 x Dell R710s for a home lab setup. After receiving them I got them up and running and was presented with a screen on I believe the LCC...
View ArticleiDrac 2.43.43.43 and ESXi 6.0 u3
Hi, I was going to upgrade our iDrac firmware from 2.15.10.10 to 2.43.43.43 and was reading through the release notes and saw that this version only supported up to U2. Will there be a release sooner...
View ArticlePoweredge T110 Re-install Keyboard Keys
HiI need to repair the R2008 server OS as I have some corrupted system files (my guess). I believe we can power down and reboot to the windows installation window by pressing some keys on the keyboard...
View ArticleDisk alerts from R820 Drac
Hi,On the GUI for the alerts that allow a choice between Info/Warning/Critical, which line needs to be checked for a Disk Predictive Failure alert to be activated (email sent)?Thx,John Bradshaw
View ArticleDell R510 - changing NIC to use Jumbo Frames for iSCSI
All-Simple question really but I want to be sure. We have a Dell R510 server and I want to change the MTU on the 2nd NIC being used for iSCSI. It right now is at the default of 1514. We also have a...
View ArticlePoweredge r510 - windows server 2016
I have one r510 server running windows 2008 server and 8 gb ramIs it compatible witn windows server 2016?What is the max amount of memory i can expand with one cpu?regards
View ArticleiDRAC Config User Privileges
Hi,Can someone pls help with the correct syntax for allowing a DRAC user OPERATORprivileges?Admin is 0x000001ff (as below) but I can't figure the correct HEX for Operator. Thxconfig -g cfgUserAdmin -i...
View ArticleSyntax query for racadm
Hi,In the following Dell paper, there is an entry for destaddr %4Can someone pls explain what that %4 is referring to (and what %1, %2, %3 might refer to also)?What destaddr is being...
View ArticleClik here to view.
How to find installed version of Dell OS Driver Pack on R730 windows or Linux
I'm not able to find installed version of Dell OS Driver Pack in R730, I'm not able to find it in omreport or in any logs.Please help me with the command to find installed version of Dell OS Driver...
View ArticleNo F11 option upon boot up
Poweredge 1600sc. Does not recognize a boot device. I swapped with another CD-ROM and now I see it in the BIOS, but it wont boot from it. It shows as a secondary drive. When booting up there is no F11...
View ArticleCannot bring new disk drive in dell R610 online
I added new drive to Dell R610 and in BIOS management RAID management cannot place it, the only option I have available is HOT SPARE online option are greyed out. As a HOT SPARE DISK is unusable. Any...
View ArticlePowerdge T110 II Backup to IBM TS3200 - what SAS Controller do I need?
HiPoweredge T110 with a perch200 installed. Do I need additional hardware to connect a fibre channel to an IBM TS3200 Tape library to do backups? I assume I would need a separate SAS controller with...
View ArticlePowerEdge R710
Hello,I have a PEdge R710 and RAID 1 config, when i enter CTRL+R i have 5disks in foreign. When I start the OS i cant see any disk, just the first one that has de OS. What should i do to get the other...
View ArticleForgotten Admin Password Need to Reset
It has been months since I have logged into my server without my password manager and I have the wrong password so I am locked out. Anyone have help? ASAP please.It is a Server 2008R2
View ArticleDell Enterprise Hardware & Software Updates, April 3-7
Popular DownloadsOpenManage Server Administrator (OMSA) 8.3OpenManage Essentials (OME) 2.2Support Live Image (SLI) 2.2SupportAssist 1.0Servers & StorageDell OS Driver Pack (Optional)Intel Rapid...
View ArticlePoweredge R730 & Modem
I have a Poweredge R730 and purchased a MultiTech MT9234SMI internal fax modem for it. I installed the modem in the lower slot on Riser 2, but after starting the server, it didn't recognize any...
View ArticlePoweredge R610 Legacy BIOS USB support ; contents of USB drive being ignored...
My R610 can 'see' the USB stick (regardless of which ports it is plugged into), however if I am in BIOS boot mode, even if I select to boot from the stick manually, it does nothing and carries onto...
View Article32 bit driver for S130 RAID controller on R230 server
Hello,I'm trying to install 32 bit Windows 2008 R2 on a Dell R230 server. I need the driver for the S130 RAID controller.I found the 64 bit version on the website, but can't find the 32 bit version....
View ArticleSpontaneous reboot of Dell Poweredge R330
I have several Dell R330 servers with an E3-1270v5 processor, all have the same problem, periodically and spontaneously the server restarts while the following is written to the ipmi-log:57 |...
View ArticleHow to restore the Poweredge T310 to factory setting?
I have a PowerEdge T310 need to reset to the factory default setting, so I can have a complete clean server to join a new domain network. The T310 came with a Window 2012 OS. I don't need anything on...
View Article