VLT0304 cpu2 vcore pg voltage is outside of range. Please resat the CPU2
Hello Experts,I have Dell PowerEdge R720:Intel Xeon E5 2620 2.0 gig dual CPU (6 core each), 32 GB of Ram, dual 750W supply.I am facing this issue from 5 days ago. Unable to run the Server but tried to...
View ArticleMEMBIST failure
I replaced my damage server board wit a new motherboard for my Server Dell Power Edge T610 and after transfering my memory sick on the old server to the new mother board on the server I got this error...
View Article2950 Gen III + H200 to a MD1000 = Fail??
I'm in the process of finishing-off my home networking lab / data center build-out, and I've got a few pieces of Dell gear that I'm completing the installation of. I have a Gen 3 2950 with an existing...
View ArticleClik here to view.
RACADM command to change Host Name
Hi,Is there a RACADM command to change the Host Name or does one still have to restart the server, do Ctrl-E etc?Thx,John Bradshaw
View ArticleOID for R410's power supplies' status
I am trying to get an SNMP OID for monitoring the status of the R410's power supplies, same as for other Dell systems, such as R420, M420, R720. In those cases I used: powerUsageStatus...
View ArticleRAID Controller Failure
I have defected Raid controllers (TY8F9 and 5CT6D) when try to boot up the PowerEdge it shows different message for each one of them,1- multi bit ECC Error2- System Halted3- FW is fault state4- Adapter...
View ArticleWindows 7 Deployment on Poweredge R730xd
I have been fighting for days now trying to deploy Windows 7 64 bit OS on my server. I can't see the drive during installation, and I can't guess which drivers for PERC H730 Mini to put on my...
View ArticleH200 >2.2TB SATA support
Does the H200 card, updated to the last firmware, support SATA drives larger than 2.2TB (in RAID 10)?
View ArticleHow to Replace Hard Disk on Power Edge R310 with RAID 5 array.
Hi, my name is Santiago im new in this group, i wanna know How to Replace Hard Disk on Power Edge R310 with RAID 5 array, my server have 4 HDD numbered 0, 1, 2 and 3 the problem is the Disk 2 is not...
View ArticlePE2900 PERC 5/i RAID-1 Drive Replacement
I have a PE2900 with a PERC 5/i controller. On the controller are 6x disks, configured as 3x RAID-1 arrays.One of the drives is showing a predicted fail. (Flashing green/amber).I'm 99.9% sure that...
View ArticleDell Power Edge R720 Gets stuck on Configuring Memory
Hi FriendsOne of our "Dell Power Edge R720 server with single processor" is not working from Thursday. On the screen it shows “Configuring Memory” and in the server’s LED “System booting”. we tried...
View ArticleIs Dell PE-T30 compatible for ESXi 6.5 install
Hi There,Please suggest if PE T30 with standard cofiguration can be used for esxi 6.5 (xeon E3-1225 v5/16 GB RAM/Chipset-Intel C236).Also do I need customized installer or regular esxi 6.5 will work?I...
View ArticleDell R815 Not Recognizing Drives
Hi there,We have a Dell R815 with 6, 4TB laptop drives installed and it is only recognizing 2 of them. We thought the RAID controller was the issue so we replaced that and it still only recognizes 2...
View ArticleBest Processors for PE-R610 Gen1?
Sorry if it's around and I missed it but I have not been able to find a 100% definite answer to my question. I have a Revision 1 R610 with a single E5502. I want to jump it up as far as I can (within...
View ArticleEnable Encryption on Samsung PM863a in M620 with H710 Mini PERC.
I've installed a pair of Samsung PM863a SSD's that have Hardware AES 256 encryption. They are not recognized as being able to encrypt when configuring in the PERC. Has anyone found a way to do so or...
View ArticlePoweredge T310 Memory upgrade
I know this are an older unit but I have got my hands on a decommissioned one that I want to setup for personal use. I also can get some decommissioned HP server memory modules but wanted to check...
View ArticleIntel HD Graphics P530 system memory usage in PowerEdge T30
Team,How much system memory is used by the Intel HD Graphics P530 video card in my PowerEdge T30? How can I change the amount? Usually, this is done in the BIOS but there aren't any options for...
View ArticleGraphics cards on R210 (Nvidia GT 1030)
Hi,Did someone test the new NVIDIA GT 1030 on a poweredge R210 / R210 ii (or other dell server with a small PSU : 250W) ?Do you know if it has a chance to work ?The CPU has a TDP of 80W and the GT 1030...
View ArticleRNIC - RDMA for R910
Hi, need to check Nic for R910 servers with support to RDMA.I check BCM5709C , but apparently requires a license."RDMA controller (RNIC) (enabled through an optional hardware key)"Does anyone know what...
View ArticleR720XD has all the amber indactor lights on steady but server is working fine?!
The status indicator lights on our PowerEdge R720XD are on steady. You can also see the primary status light has both the amber and blue LED's on... basically, ALL the LEDs are lit up. The server is...
View Article