r710 power supply errors...
I recently installed a iDRAC6 enterprise in my R710 and then upgrade the firmware to the latest 1.99. After doing this I noticed that I was having PSU issues. I have two 570W PSU in the r710 and both...
View ArticlePE-710 Server Memory Details
Hi, I have 16 8 GB Ram (p/N:MT72HTS1G72FZ-667H1D6 (4Rx4)). I want use all this Ram in PE-R710 servers. Just suggest me, can I use these RAm in PE-R710 and it's is compatible for PE-R710.regardsGS
View ArticleSudden Noisy Fans
Hello all,I have a DELL PowerEdge 6850 Server. Suddenly this morning my fans went on full speed without any reason (No heat problems, server room is well conditioned).The server is running normally,...
View ArticlePE2950 Server - E1410 SYSTEM FATAL ERROR
Hi PeopleI really hope somebody can advised on what this error actually translates to?The server when powered up does not even start its POST and just displays the above error on the LED screen of...
View ArticleServer will not recognize hard drives
After a hard reboot, server tag# {{Removed by Moderator}}, will not recognize any hard drives, only options available in bios settings are for optical drive or NIC card, no recognition of raid system...
View ArticlePoweredge R510 only recognizes 32Gb RAM (of total 64Gb)
Hi there,I have a R510 poweredge server with 1 processor (Intel(R) Xeon(R) CPU E5630 @ 2.53GHz)It used to have 12Gb (3x4Gb) of ram, but i've decided to do an upgrade.I have purchased these modules: 8...
View ArticlePE 710 Fresh install 2012R2 extremely poor performance after 36 hours of use
I've got a server that has a fresh install of 2012R2 and after about 36 hours of operation will slow down to the point where logging into the server to get to the desktop might take over an hour. I've...
View ArticleClik here to view.
Issues on Installation of GPU on R730
Hi,I purchased an R730 Rack Server and an Nvidia Tesla K40 GPU, and I would like to install it to my server by myself. However, I am having some troubles.Here is some information on the server spec....
View ArticlePERC H700 Integrated battery state "unknown"
OMSA on Dell PowerEdge R510 is displaying state "unknown" on PERC H700 controller battery:Properties:Name: Battery 0State: UnknownBattery Tasks: No Task AvailableWhat does this state "unknown"...
View ArticleUpgrading SAS/ir to Perc 6/i
Hello. I have an R610 server that has a SAS/ir controller in it. I purchased a PERC 6/i card (0T954J) and attempted to install it where the SAS/ir card was.When I try to boot, the system does not post....
View ArticleR510, Triple Channel RAM per CPU ? Just need simple yes/no
I just need to know if, even with its odd DIMM layout, if the R510 supports triple channel memory per CPU.
View ArticleCorrect Dell p/n for NVIDIA GPU for GRID K2A for Dell PowerEdge VRTX
Looking to install a NVIDIA GPU for GRID K2A card into a VRTX but not sure of the correct Dell part number.Would DP/N: KVJ6K be compatible?Thanks
View ArticleR410 red light blinking
I can't find any description in the hardware manual for a red light blinking on the display panel on the front (there's no error message) and a red led blinking below the NIC card on the back of the...
View ArticlePowerEdge T410 and Intel PCIe SSD (P3500, P3600, P3700)
Anyone try putting one of these cards into this server?Will it work?thanks
View ArticleController event log
Hi,Pls help for this ..Yesterday my server was stuck in post screen. Only Blank screen shown on server. After restart the server is gone in CHKDSK and then boot successfully . All hardware is showing...
View ArticleNvidia GTX 770 in a Poweredge 2900
Hey guys,I have a Poweredge 2900 with redundant 900w power supplies and currently running a modified Geforce 7800 graphics card (16x to 8x by cutting pins). The card that I would like to run is a GTX...
View Articlepoweredge c2100/fs12-ty update
Hi, what's the best way to update these boxes? I tried looking for the correct package in DRM but doesn't seem to be a supported model. Thanks in advance- Joe
View ArticlePowerEdge 1950, Voltage 1.8V PG, State Asserted
Hello.I have a problem with one of Dell PowerEdge 1950.It reboots every ~30 minutes now."ipmi ... sel elist" show "Voltage 1.8V PG | State Asserted"Can this problem be resolved by replacing power...
View Articlebxnd60a.sys - BSOD
First off, apologies if this is in the wrong place!I have a Dell PowerEdge r510 on which runs Windows Server 2012 R2. Its running AD/DNS and Hyper V.I am getting repetitive BSOD events citing...
View ArticleConnecting power for GPU in T630
I have a T630 that I need to connect a Grid K1. The requirement for this came after the server was already delivered, so my sales rep also ordered a power kit to go with the GPU. The kit consists of a...
View Article