Clik here to view.
Cannot apply DUP for iDRAC on M710HD
Hi,I am trying to update the drac on four m710HDs and cannot get the 3.75 version to install (up from 3.65). Error is in the shot below, which is a really weird message. Happens on all machines.Doesn't...
View ArticleQ Logic single port card is not working
Hi,I have facing some issue with q logic single port HBA card in PE-710. In this HBA card is not working and all three LED IS now blinking at once. now server is in production. RegardsGS
View ArticleCannot update FW on Intel I350-t using LCC
I have a similar issue.several Dell R720xd servers with a Gigabit 4P I350-t Adapter, and i can't get the firmware updated to 16.5.20I am using the latest SUU dvd, from witin the lifecycle controller....
View ArticleDELL PE R200 + 4 TB
Hi,Is it possible to connect 2 X 4 TB HDD directly to the onboard SATA ports and start using it?I wish to convert it to a simple file server.Thanks
View ArticlePowerEdge M610 EOL
Anyone could advise me about Blade server M610 end of life?many thanks,-TC-
View ArticleBasic Remote Management possibilities on T20 server
Hello,We have bought a T20 server. I would like to use a convencional basic remote functions etc. power on/ power off /reboot/ watch hardware healthy and remote console. Can someone tell it possible to...
View ArticleiDrac remote session ip log
Hello,I wanted to check something that is a potential security issue for me.When I connect to iDrac on my PowerEdge R620 (Version 7.4.0), is there any log kept (either on the iDrac card or on the...
View ArticleC6145, Ubuntu: omreport no controllers found
I'm running Ubuntu 14.04, 64bit, on a C6145. I installed srvadmin-all 7.4 via the directions at linux.dell.com/repo/community/ubuntu/. It installed successfully.However, when I run...
View ArticlePowerEdge T110 Heat Sink Socket Measurements?
I know that the PE T110 (version 1) runs a socket 1156, but I bought two different socket 1156 heat sinks to replace the stock and realized that they don't fit. The screws are slightly wider than the...
View Articlepoweredge 6105 ip address configurations
can someone please help me with ip address configuration on the IPMI port of poweredge 6105 ?/
View ArticleCannot get 16 GB of RAM to work
We have a Dell PowerEdge 1900 Version 2 server. We are trying to install 16GB of RAM in the machine. We installed 2 GB sticks in the 8 slots but the machine is picking up the primary slots and not the...
View ArticlePowerEdge 2950 - generation ?
I got into my hands PowerEdge 2950 and I would like to know what is generation ...On front dont have labled any number in circle. But when i open OMSA 7.4 look like 2 gen.Baseboard Management...
View ArticlePoweredge 750 beep code
We have an old PowerEdge 750 giving beep code 4-4-2. It's not listed in the troubleshooting guide. Anyone know what it means?
View ArticleDell Poweredge R610 Server 2012 R2 - Unable to Update Frimware
I am working with an acquired Dell Poweredge R610 with the latest BIOS (6.4.something) and I want to apply the firmware updates recommended by dell support website (or Dell Repository Manager) so that...
View ArticleMemory question
Hi, we have a PowerEdge R510 and would like to add more RAM. Currently, there are x3 4GB sticks in slots A1-A3. We bought x2 8GB sticks and are attempting to install them in any of the B1-B4 slots, but...
View ArticleSUU not working on R720
I have a customer with an R720. I downloaded and ran the latest SUU on it. It found several updates needed but when I tell it to install the updates, it opens the update window and after about 5...
View Article6 Pin J_PW_NVRAM on R920 motherboard. Can i use it as Fusion 1.2TB ioDriver2...
Power Cable ships with ioDriver2 Duo has 2 6pin connector. Big one for power supplier and small one for io Memory Card. I find nowhere to plug the Big one connector on my R920 motherboard. A 6 Pin...
View ArticleClik here to view.
Poweredge 2900 PS1 predictive failure
Hi everyone,I have a poweredge 2900 server (it is no longer under warranty). Yesterday I saw a warning icon in OpenManage for Power Supply 1: "presence detected. Predictive failure". So I shutted down...
View ArticleiDRAC Express to Enterprise (do I remove express card)
Morning,My R710 servers all have iDRAC Express and we just bought Enterprise cards. Dell Support says remove the Express card then add the Enterprise card.Two questions:1. Does the Express card have...
View Article