remote racadm commands fail with "ERROR: Unable to obtain raid config" or...
When running remote racadm commands to an R730XD, it will intermittently/randomly fail with either "ERROR: Unable to obtain raid config" or "ERROR: Unable to connect to RAC at specified IP address."To...
View ArticleHD SAS blocked
Hello, I have a BLADE R420 HDS with two SAS and one of the hard drives were defective, got another HD SAS but not dell, but when I put the BLADE is listed as blocked.If I put defective HD, I can build...
View ArticlePoweredge C6220 Power Supply
My company just purchased two Poweredge C6220 SFF (4-Node) server racks. The 1400W power supplies that came with the servers require 200-240V input and we need power supplies that allow and input of...
View ArticleDell PERC H700
hello everyone i would like to know if this raid controller Dell PERC H700 is supported SATA 3.0 which is 6.0gb/secTHANK YOUMATHEUS
View ArticlePE T110 II - Error 1,3,4 and long time to boot
Hi Folks !We have a T110 II. It to a Internet Gateway.So ...Boot up time is too long.Between 4 a 6 minutes.After, works fine.But ...When I'll go update via DUP or using OSMA or Deployment Kit:- LCL...
View Articler810 what is the maximum size ssd drive.
I am considering getting some refurbished R810 servers and I am wondering what is the maximum SATA SSD drive permitted. I have the specs which say up to 100GB for SATA SSD, but have seen some posts...
View ArticleDell Poweredge 710 - need info to use as iscasi storage
Hello. this will be new task for me, we have 6 4tb sata disk in dell Power edge 710 server, we have to use this server as a iscasi storage, no idea how to start. i am creating lab environment with 3...
View ArticleClik here to view.
Is this Mainboard of Dell Poweredge 2900 gen. I, or gen. III
Hi @ all,I've recently got this mb + accessories from a friend and I wanted to get this alive now. But in order to do so, I'd need some information about it. So i can get the right cpusAccording to my...
View ArticlePoweredge 2950 iii E1410 CPU IERR
I just bought parts for my new old dell poweredge 2950 I put the dual xeon e5440s in it and it gives me a cpu mismatch so I take out cpu 1 and it boots just fine (I also put cpu 1 in to the other slot...
View ArticleDell T20 and SR-IOV
Hi,I have a Dell T20 with the Xeon processor; I'm generally very happy with it but I'm struggling to get SR-IOV working with my Intel 82576 Network cards. As far as I can tell, my system meets the...
View ArticleSystem board MTBF statistics? My R910 is getting it's 5th motherboard today.
Hi Guys,Does Dell keep statistics on Mean Time Between Failures for their system boards? I purchased this $30K machine back int 2012, and the system board has failed 4 times. Most recently yesterday....
View ArticleR815 : Non optimal memory configuration after upgrading from 2 CPUs to 4
Hi folks,I have a few R815 servers that I've upgraded from 2 CPUs each to 4 CPUs each. The servers have 256GB of RAM in the form of 16x16GB PC3L 12800R sticks.After first seeing that message, I...
View ArticleReported fault on every SATA drive when connected to a Perc 6/i raid controller
I recently purchased a Dell R710 (service tag <removed>) that came with a Perc 6i integrated raid controller.I also purchased 6 (Dell Certified 1TB Enterprise SATA 3.5") hard drives,...
View ArticleDell T110 ii F10 automatically on startup
Server Dell T110 ii company automatic on startup F10 how to overcome ?
View ArticleT130 Fan Speed Algorithm
I have a T130 server (1 week old) and since adding a Broadcom 5722 (single port NIC) the cooling fan has speeded up significantly (and very noisily). Running OpenSUSE 42.1 and functionally all is...
View ArticleClik here to view.
Placement of Memory in Dell R 720 servers and Processor speed
I am trying to setup a Dell Poweredge R 720 server( Dual Intel Xeon E5-2640 2.5 Ghz 6-Core CPU’s) with 48Gb Ram (12 x 4Gb PC3L-10600R). My question is regarding the placement of RAM in the DIMM slots...
View ArticleR710 displays only 640x480
I have 2 Dell R710's that only display 640x480 out of both the VGA ports. There is no indication of a video driver issue, and these devices are on 24/7 so it's not like it happened during a reboot. Any...
View ArticleDell 510 MIX memory configuration
I have 1 cpu out of 2 on my dell 510 & i want to install part of a mix of 3x8GB & 2x16GB memory that i have, i have 4 slots per cpu 1-3 white 4 black. i is correct that -1. the second group of...
View ArticleChelsio T5 on M630
We are ordering M630 blades for M1000e chassis and we'd like to equip them with Chelsio T5 network interfaces (e.g. T520 10G cards). It does not seem to be available as an option (No Chelsio Mezz card)...
View ArticleMixing 32GB and 16 GB memory on the T630
Can I mix 2 32GB DELL A8711888 With 2 16GB DELL A8711887, DELL SNPHNDJ7C/16G32GB RDIMM, 2400MT/s, Dual Rank, x4 Data Width (Chips Organization X4)16GB RDIMM, 2400MT/s, Dual Rank, x8 Data Width (Chips...
View Article